21 BORRETT ROAD PHASE 2
Borrett Road Air conditioning Services
Hong Kong Island · Central and Western District · Luxury Residence
Borrett Road Phase 2 is on Hong Kong Island, Central and Western District; its location can be referenced by 21 Borrett Road. For AC service enquiries, please first confirm the existing equipment, access scope, and arrangements. For AC cleaning, please provide the block, floor, unit, model, and number of units; the existing fit-out and indoor/outdoor unit positions must be confirmed from photos, and the work cannot be estimated from the estate name alone. Borrett Road Phase 2 is 21 BORRETT ROAD; when enquiring, please state the actual phase, block, and unit, and do not mix it up with the unit positions and access arrangements of Phase 1. If inspection, repair, or replacement is needed, it will be checked separately based on the issue and scope of work.
AMain services · HOME AC CLEANING
Residential AC cleaning
AC cleaning is our main service. Split units and window units use the same household price list, charged by the number of units cleaned; additional items will be quoted separately first.
First match the model and decoration protection
A luxury home does not mean every unit uses the same system. Please provide photos of each unit, model number, air outlets and any service openings that can be photographed safely, and distinguish between wall-mounted units, ceiling units or other equipment. Protection for wooden floors, stone, woodwork and furniture must be stated in advance. Concealed equipment, high-level work or additional dismantling should be assessed and quoted first; do not open live units or remove renovation materials on your own.
First check each indoor and outdoor unit
When arranging AC cleaning at Ying Tin, please send photos of the unit, model, items under the unit, outdoor unit, and accessible areas. For window units, first assess whether they can be safely removed; for split units, clearly distinguish indoor cleaning from outdoor unit work. Do not lean out or remove supports yourself. Please also mention any existing dripping, poor cooling, or tripping.
Confirm the cleaning scope after location is verified
Use Bruce Road 21 (Phase 2) as the location reference, but the actual block and flat still need to be provided. Dust cleaning, pre-existing part faults, drain pipe routing and supporting works are defined separately; any high-level or additional work will be explained and quoted in advance.
KNOW THE PLACE
Borrett Road location and on-site service information
Ying Tin in Central and Western District
Enquire about AvailablePlease provide 21 BORRETT ROAD PHASE 2 and the actual street number. Ying Tin is located on Borrett Road 21 (Phase 2). Different phases, blocks or units may use different entrances. For on-site service, please provide the actual street number, block and unit.
Project name and enquiry scope
Borrett Road Phase 2 is 21 BORRETT ROAD; when enquiring, please state the actual phase, block, and unit, and do not mix it up with the unit positions and access arrangements of Phase 1.
Check the English name and door number together
Enquire about AvailablePlease also provide 21 BORRETT ROAD PHASE 2, 21 Borrett Road (Phase 2), and the actual floor/unit to avoid confusion with the same-named or nearby property; unit configuration and access requirements will be confirmed on site.
The address does not indicate the existing model
Residents may have replaced the unit, changed the window frame, or renovated the flat. Whether the premises are for rent or sale, what work residents can arrange, and management requirements, should be confirmed according to the actual unit; the property name alone cannot be used to infer the model, and cleaning and charges are based on the existing equipment confirmed.
OPOExpert Air Conditioning has completed a total of50,000 case(s) or moreServices
Property location reference
ADDRESS · 21 BORRETT ROAD PHASE 2
Property location reference
- Location reference21 Po Lau Road (Phase 2)
Property details reference
Borrett RoadAC cleaning service details
Split-type indoor unit cleaning
Clean the cooling coil, fan blades (squirrel cage), dust filter and drain tray, and clear and inspect the drainage. Water collection and electronic board waterproof protection are prepared before cleaning.
Window unit cleaning
Clean the dust filter according to the model, installation location and accessible area, and inspect dust build-up. The customer does not need to dismantle the unit themselves.
Key points of the cleaning process
- Inspection and on-site protection
- Clean components and drainage
- Assembly and test run
- Clean up and restore the site
Basic scope and separate quotations
Basic indoor cleaning for split-type units does not include the outdoor condenser. If additional cleaning, repairs, or parts replacement are needed, we will first confirm feasibility and provide a quote, and proceed only after the customer’s confirmation.
BEFORE YOU MESSAGE
Prepare these four items before enquiry for a faster quotation
Full service address
Please provide the actual door number, phase, block, floor and flat of Opus Hong Kong; do not use only Barker Road 21 (Phase 2) or a nearby landmark as a substitute.
Model and number of units
List the model, unit type and quantity for each unit, and take photos of the unit and model label; if unsure, send photos first
Existing installation position and protection
Photograph the indoor and outdoor units, drainage and accessible areas, and explain the items under the unit, such as beds, sofas or fixed cabinets; do not dismantle the unit yourself
Symptoms and time of entry
Explain the odour, dripping, or weak cooling issues, the available access time, and any known registration requirements; if there is tripping or a burning smell, stop using the unit first
ALSO AVAILABLE
You can also enquire about services other than cleaning
- BAC inspectionIf it is not cooling, leaking, making unusual noise, or showing an error code, please describe the issue first before arranging an inspection; inspection/visit fee HK$500
- CAC repairAfter inspection, the problem and quotation will be explained first. Repair will begin only after confirmation; HK$500 can be deducted from the repair fee, and repair is not covered by warranty
- DInstallation and replacementNew unit installation, old unit removal or unit relocation, quoted according to photos and site details; basic installation does not include new power wiring
QUESTIONS
Borrett RoadAC service FAQs
What address should be provided for AC service enquiries for Borrett Road?
Borrett Road Phase 2 can be referenced by 21 Borrett Road. Different phases, blocks, or units may use different entrances, so the actual street number, block, and unit must still be provided for on-site service. Please provide Borrett Road's full address, phase, block, floor, and unit, and also the model, number of units, and photos of the AC location.
Is there a separate estate or building rate for AC cleaning at Borrett Road?
This is not separately charged by the property name Ying Tin. Rates are checked against the existing model, number of units and main price list; commercial units, outdoor units, high-level work or add-on work must be scoped and quoted separately first.
If the AC at Borrett Road is dripping or not cooling, should it be cleaned first or inspected first?
First explain where and when the symptom appears. Dust buildup, poor drainage and component faults are handled differently; if the cause is unclear, inspect first before confirming cleaning or repair, and cleaning does not guarantee the fault will be resolved. If water is near electrical equipment, stop using the relevant equipment first.
How is the on-site inspection fee for Borrett Road calculated?
The inspection/call-out fee is HK$500, and it is the same charge, not charged separately twice. If repairs are carried out after the inspection, this HK$500 can be deducted from the repair fee; if no repair is carried out or the quotation is not accepted, HK$500 will be charged.
Does air conditioning repair include a warranty?
Our repair service does not include a warranty, including parts and workmanship. After inspection, we will first explain the fault, the method of handling, the parts needed and the quotation. Work will only begin after confirmation; parts availability is checked according to the actual model.
What installation items need to be checked when replacing an AC at Borrett Road?
Provide the new and old unit models, indoor and outdoor unit locations, mounting support, piping, drain and power supply positions, and confirm removal of the old unit, transport and any extra works. Running a new power supply from the main switch to beside the unit is not included in basic installation. The general installation warranty is one year and is calculated separately from the manufacturer's warranty for the unit. Building or management requirements are subject to actual confirmation.
Is there a warranty for AC cleaning?
The cleaning service includes a 90-day warranty. The applicable scope and conditions should be checked against the cleaning service terms; for example, in a dripping case, it must first be confirmed whether it was caused by the cleaning. This does not mean all pre-existing faults or leaks are repaired free of charge.
EnquiryBorrett RoadAC services
Enquire about AC cleaning, or learn about inspection, repair and installation arrangements; provideUnit type, quantity and photos to help customer service reply