NO. 1 & 3 EDE ROAD TOWER 1
Yat Tat Road 1 and 3 No. 1 Block Air conditioning Services
Kowloon · Kowloon City District · Residential property
Yat Tat Road 1 and 3 No. 1 Block is located in Kowloon City District, Kowloon. The location can be referenced to No. 1-3 Yat Tat Road, Beacon Hill, Kowloon City, Kowloon. For AC service enquiries, please first confirm the existing equipment, access scope, and arrangements. For AC cleaning, please provide the block, floor, unit, model, and number of units first. The current renovation condition and the locations of the indoor and outdoor units must be confirmed by photos; the work cannot be estimated based on the property name alone. Please confirm the installation location according to the actual block, floor, and unit, and do not assume the existing AC equipment or access eligibility from the estate information. If inspection, repair, or replacement is required, it will be checked separately according to the issue and scope of work.
AMain services · HOME AC CLEANING
Residential AC cleaning
AC cleaning is our main service. Split units and window units use the same household price list, charged by the number of units cleaned; additional items will be quoted separately first.
First check each indoor and outdoor unit
When arranging AC cleaning at Yee Tak Street 1 and 3 No. 1 Block, please take photos of the unit, model number, items below the unit, the outdoor unit, and the accessible area. For a window unit, first assess whether it can be safely removed; for a split-type unit, distinguish between indoor cleaning and outdoor unit work. Do not lean out or remove the support yourself. Any existing water leakage, poor cooling, or tripped breaker must be stated in advance.
Confirm the cleaning scope after location is verified
Use Ede Road, Beacon Hill, Kowloon City, Kowloon 1-3 as a location reference only, and still provide the actual block and unit. Cleaning dust, pre-existing part faults, drain pipe routing and support work are charged separately; any high-level or additional work should be explained and quoted first.
KNOW THE PLACE
Location and on-site details for Yat Tat Road 1 and 3 No. 1 Block
in Kowloon City District, Yee Tak Street 1 and 3 No. 1 Block
Enquire about AvailablePlease also provide NO. 1 & 3 EDE ROAD TOWER 1 and the actual street number. The location of Ede Road 1 and 3 Block 1 can be referenced to 1-3 Ede Road, Beacon Hill, Kowloon City, Kowloon. Different phases, blocks or units may use different entrances, so for on-site service please still provide the actual street number, block and unit.
Project name and enquiry scope
Please confirm the unit location by the actual block, floor and flat number; do not infer the existing air-conditioning equipment or site access from estate information.
Check the English name and door number together
Enquire about AvailablePlease also provide NO. 1 & 3 EDE ROAD TOWER 1, No. 1-3 Ede Road, Beacon Hill, Kowloon City, Kowloon, and the actual floor and unit number to avoid confusion with similarly named or nearby properties; the unit layout and access requirements will be confirmed on site.
The address does not indicate the existing model
Residents may have replaced the unit, changed the window frame, or renovated the flat. Whether the premises are for rent or sale, what work residents can arrange, and management requirements, should be confirmed according to the actual unit; the property name alone cannot be used to infer the model, and cleaning and charges are based on the existing equipment confirmed.
OPOExpert Air Conditioning has completed a total of50,000 case(s) or moreServices
Property location reference
ADDRESS · NO. 1 & 3 EDE ROAD TOWER 1
Property location reference
- Location referenceEde Road1-3, Beacon Hill, Kowloon City, Kowloon
Property details reference
Yat Tat Road 1 and 3 No. 1 BlockAC cleaning service details
Split-type indoor unit cleaning
Clean the cooling coil, fan blades (squirrel cage), dust filter and drain tray, and clear and inspect the drainage. Water collection and electronic board waterproof protection are prepared before cleaning.
Window unit cleaning
Clean the dust filter according to the model, installation location and accessible area, and inspect dust build-up. The customer does not need to dismantle the unit themselves.
Key points of the cleaning process
- Inspection and on-site protection
- Clean components and drainage
- Assembly and test run
- Clean up and restore the site
Basic scope and separate quotations
Basic indoor cleaning for split-type units does not include the outdoor condenser. If additional cleaning, repairs, or parts replacement are needed, we will first confirm feasibility and provide a quote, and proceed only after the customer’s confirmation.
BEFORE YOU MESSAGE
Prepare these four items before enquiry for a faster quotation
Full service address
Please provide the actual street number, phase, block, floor and flat for Block 1, 1 and 3 Yee Tak Street; do not use only No. 1-3 Yee Tak Street, Kowloon City, Beacon Hill, Kowloon or nearby landmarks instead
Model and number of units
List the model, unit type and quantity for each unit, and take photos of the unit and model label; if unsure, send photos first
Existing installation position and protection
Photograph the indoor and outdoor units, drainage and accessible areas, and explain the items under the unit, such as beds, sofas or fixed cabinets; do not dismantle the unit yourself
Symptoms and time of entry
Explain the odour, dripping, or weak cooling issues, the available access time, and any known registration requirements; if there is tripping or a burning smell, stop using the unit first
ALSO AVAILABLE
You can also enquire about services other than cleaning
- BAC inspectionIf it is not cooling, leaking, making unusual noise, or showing an error code, please describe the issue first before arranging an inspection; inspection/visit fee HK$500
- CAC repairAfter inspection, the problem and quotation will be explained first. Repair will begin only after confirmation; HK$500 can be deducted from the repair fee, and repair is not covered by warranty
- DInstallation and replacementNew unit installation, old unit removal or unit relocation, quoted according to photos and site details; basic installation does not include new power wiring
QUESTIONS
Yat Tat Road 1 and 3 No. 1 BlockAC service FAQs
What address should be provided for AC service enquiries for Yat Tat Road 1 and 3 No. 1 Block?
The location of Yat Tat Road 1 and 3 No. 1 Block can be referenced to No. 1-3 Yat Tat Road, Beacon Hill, Kowloon City, Kowloon. Different phases, blocks, or units may use different entrances. For on-site service, please provide the actual building number, block, floor, and unit. Please also provide the full address of Yat Tat Road 1 and 3 No. 1 Block, including phase, block, floor, and unit, together with the model, number of units, and photos of the installation locations.
Does AC cleaning in Yat Tat Road 1 and 3 No. 1 Block have a separate estate or building rate?
There is no separate charge based on the property name, No. 1 and 3, Yi Tak Road, Block 1. Prices are checked against the existing unit type, number of units and main price list; for commercial units, outdoor units, high-level or additional work, scope and quotation must be clarified first.
If the AC in Yat Tat Road 1 and 3 No. 1 Block is leaking water or not cooling, should cleaning or inspection be done first?
First explain where and when the symptom appears. Dust buildup, poor drainage and component faults are handled differently; if the cause is unclear, inspect first before confirming cleaning or repair, and cleaning does not guarantee the fault will be resolved. If water is near electrical equipment, stop using the relevant equipment first.
How is the on-site inspection fee for Yat Tat Road 1 and 3 No. 1 Block calculated?
The inspection/call-out fee is HK$500, and it is the same charge, not charged separately twice. If repairs are carried out after the inspection, this HK$500 can be deducted from the repair fee; if no repair is carried out or the quotation is not accepted, HK$500 will be charged.
Does air conditioning repair include a warranty?
Our repair service does not include a warranty, including parts and workmanship. After inspection, we will first explain the fault, the method of handling, the parts needed and the quotation. Work will only begin after confirmation; parts availability is checked according to the actual model.
What installation items need to be checked when replacing the AC in Yat Tat Road 1 and 3 No. 1 Block?
Provide the new and old unit models, indoor and outdoor unit locations, mounting support, piping, drain and power supply positions, and confirm removal of the old unit, transport and any extra works. Running a new power supply from the main switch to beside the unit is not included in basic installation. The general installation warranty is one year and is calculated separately from the manufacturer's warranty for the unit. Building or management requirements are subject to actual confirmation.
Is there a warranty for AC cleaning?
The cleaning service includes a 90-day warranty. The applicable scope and conditions should be checked against the cleaning service terms; for example, in a dripping case, it must first be confirmed whether it was caused by the cleaning. This does not mean all pre-existing faults or leaks are repaired free of charge.
EnquiryYat Tat Road 1 and 3 No. 1 BlockAC services
Enquire about AC cleaning, or learn about inspection, repair and installation arrangements; provideUnit type, quantity and photos to help customer service reply