CHEUNG FAT BUILDING

Cheung Fat Building Air conditioning Services

Kowloon · Sham Shui Po District · Residential property

Cheung Fat Building is in Sham Shui Po District, Kowloon; the location may be referenced as 60-64 Yu Chau Street. We have provided AC services at Cheung Fat Building before. For AC cleaning, please first provide the block, floor, flat, model and number of units; existing renovations and indoor/outdoor unit locations must be confirmed from photos, and the work scope cannot be estimated from the estate name alone. If inspection, repair or replacement is needed, it will be checked separately according to the issue and scope of work.

AMain services · HOME AC CLEANING

Residential AC cleaning

AC cleaning is our main service. Split units and window units use the same household price list, charged by the number of units cleaned; additional items will be quoted separately first.

  • First check each indoor and outdoor unit

    When arranging AC cleaning at Cheung Fat Building, please provide photos of the unit, model, items under the unit, the outdoor unit and the accessible area. For window units, first assess whether they can be safely removed; for split units, distinguish between indoor cleaning and outdoor unit work. Do not lean out or remove the support yourself. Please also state any existing dripping, no-cooling or tripping issues.

  • Confirm the cleaning scope after location is verified

    Use Yu Chau Street 60-64 No. as a location reference, but please still provide the actual block and flat number. Dust removal, pre-existing part faults, drain pipe routing and support works are defined separately; high-level or additional work must be stated and quoted in advance.

KNOW THE PLACE

Cheung Fat Building location and on-site service information

  • Cheung Fat Building, Sham Shui Po District

    Enquire about AvailablePlease provide Cheung Fat Building and the actual door number. For Cheung Fat Building, refer to Yu Chau Street 60-64. Different phases, blocks or units may use different entrances. On-site service still requires the actual door number, block and unit.

  • Check the English name and door number together

    Enquire about AvailablePlease also provide Cheung Fat Building, Yu Chau Street 60-64 and the actual floor and unit number to avoid confusion with similarly named or nearby properties; unit configuration and access requirements will be confirmed on site as needed.

  • The address does not indicate the existing model

    Residents may have replaced the unit, changed the window frame, or renovated the flat. Whether the premises are for rent or sale, what work residents can arrange, and management requirements, should be confirmed according to the actual unit; the property name alone cannot be used to infer the model, and cleaning and charges are based on the existing equipment confirmed.

We have appeared inCheung Fat BuildingProvide AC services;OPOExpert Air Conditioning has completed a total of50,000 case(s) or moreServices

Property location reference

ADDRESS · CHEUNG FAT BUILDING

Property location reference

  • Location referenceYu Chau Street 60-64
Property details reference

Cheung Fat BuildingAC cleaning service details

Split-type indoor unit cleaning

Clean the cooling coil, fan blades (squirrel cage), dust filter and drain tray, and clear and inspect the drainage. Water collection and electronic board waterproof protection are prepared before cleaning.

Window unit cleaning

Clean the dust filter according to the model, installation location and accessible area, and inspect dust build-up. The customer does not need to dismantle the unit themselves.

Key points of the cleaning process

  1. Inspection and on-site protection
  2. Clean components and drainage
  3. Assembly and test run
  4. Clean up and restore the site
View full cleaning scope and process

Basic scope and separate quotations

Basic indoor cleaning for split-type units does not include the outdoor condenser. If additional cleaning, repairs, or parts replacement are needed, we will first confirm feasibility and provide a quote, and proceed only after the customer’s confirmation.

BEFORE YOU MESSAGE

Prepare these four items before enquiry for a faster quotation

  1. Full service address

    Provide the actual street number, phase, block, floor and shop/unit number for Cheung Fat Mansion; do not use only Yee Chow Street 60-64 or nearby landmarks.

  2. Model and number of units

    List the model, unit type and quantity for each unit, and take photos of the unit and model label; if unsure, send photos first

  3. Existing installation position and protection

    Photograph the indoor and outdoor units, drainage and accessible areas, and explain the items under the unit, such as beds, sofas or fixed cabinets; do not dismantle the unit yourself

  4. Symptoms and time of entry

    Explain the odour, dripping, or weak cooling issues, the available access time, and any known registration requirements; if there is tripping or a burning smell, stop using the unit first

ALSO AVAILABLE

You can also enquire about services other than cleaning

QUESTIONS

Cheung Fat BuildingAC service FAQs

What address should be provided for an AC service enquiry at Cheung Fat Building?

Cheung Fat Building may be referenced as 60-64 Yu Chau Street. Different phases, blocks or flats may use different entrances, so on-site service still requires the actual door number, block and flat. Please provide the full address for Cheung Fat Building, including the phase, block, floor and flat, and also provide the model, number of units and photos of the unit location.

Is there a separate estate or building price for AC cleaning at Cheung Fat Building?

This is not charged separately by property name for Cheong Fat Building. Charges are checked against the existing unit type, number of units, and main price list; for commercial units, outdoor units, high-level work, or additional work, the scope and quotation must be confirmed first.

If there is AC dripping or poor cooling at Cheung Fat Building, should cleaning or inspection come first?

First explain where and when the symptom appears. Dust buildup, poor drainage and component faults are handled differently; if the cause is unclear, inspect first before confirming cleaning or repair, and cleaning does not guarantee the fault will be resolved. If water is near electrical equipment, stop using the relevant equipment first.

How is the on-site inspection fee for Cheung Fat Building calculated?

The inspection/call-out fee is HK$500, and it is the same charge, not charged separately twice. If repairs are carried out after the inspection, this HK$500 can be deducted from the repair fee; if no repair is carried out or the quotation is not accepted, HK$500 will be charged.

Does air conditioning repair include a warranty?

Our repair service does not include a warranty, including parts and workmanship. After inspection, we will first explain the fault, the method of handling, the parts needed and the quotation. Work will only begin after confirmation; parts availability is checked according to the actual model.

What installation items should be checked when replacing the AC at Cheung Fat Building?

Provide the new and old unit models, indoor and outdoor unit locations, mounting support, piping, drain and power supply positions, and confirm removal of the old unit, transport and any extra works. Running a new power supply from the main switch to beside the unit is not included in basic installation. The general installation warranty is one year and is calculated separately from the manufacturer's warranty for the unit. Building or management requirements are subject to actual confirmation.

Is there a warranty for AC cleaning?

The cleaning service includes a 90-day warranty. The applicable scope and conditions should be checked against the cleaning service terms; for example, in a dripping case, it must first be confirmed whether it was caused by the cleaning. This does not mean all pre-existing faults or leaks are repaired free of charge.

EnquiryCheung Fat BuildingAC services

Enquire about AC cleaning, or learn about inspection, repair and installation arrangements; provideUnit type, quantity and photos to help customer service reply