CHEONG WAI BUILDING

Cheong Wai Building Air conditioning Services

Kowloon · Yau Tsim Mong District · Residential property

Cheong Wai Building is in Yau Tsim Mong District, Kowloon, and its location can be referenced at Portland Street 62-66. We have provided AC services at Cheong Wai Building before. For AC cleaning, please first provide the tower, floor, unit, AC model and number of units. Existing renovation work and indoor/outdoor unit locations must be confirmed from photos; the work cannot be estimated based only on the property name. If inspection, repair or replacement is needed, it will be confirmed separately according to the issue and scope of work.

AMain services · HOME AC CLEANING

Residential AC cleaning

AC cleaning is our main service. Split units and window units use the same household price list, charged by the number of units cleaned; additional items will be quoted separately first.

  • First check each indoor and outdoor unit

    When arranging AC cleaning at Cheung Wai Building, please take photos of the unit, model, items beneath it, outdoor unit, and accessible area. For window units, first assess whether it can be safely removed. For split units, distinguish between indoor cleaning and outdoor unit work. Do not lean out or remove the support yourself. Please advise of any existing water leakage, poor cooling, or tripping.

  • Confirm the cleaning scope after location is verified

    Using Nos. 62-66, Portland Street as a location reference, you still need to provide the actual block and flat. Dust cleaning, pre-existing part faults, drain piping routing and support works are assessed separately; high-level or additional work will be explained and quoted in advance.

KNOW THE PLACE

Cheong Wai Building location and on-site service information

  • Cheong Wai Building in Yau Tsim Mong District

    Enquire about AvailablePlease provide Cheong Wai Building and the actual door number. For Cheong Wai Building, refer to Portland Street 62-66. Different phases, blocks or units may use different entrances. On-site service still requires the actual door number, block and unit.

  • Check the English name and door number together

    Enquire about AvailablePlease also provide Cheong Wai Building, Portland Street 62-66 and the actual floor and unit number to avoid confusion with similarly named or nearby properties; unit configuration and access requirements will be confirmed on site as needed.

  • The address does not indicate the existing model

    Residents may have replaced the unit, changed the window frame, or renovated the flat. Whether the premises are for rent or sale, what work residents can arrange, and management requirements, should be confirmed according to the actual unit; the property name alone cannot be used to infer the model, and cleaning and charges are based on the existing equipment confirmed.

We have appeared inCheong Wai BuildingProvide AC services;OPOExpert Air Conditioning has completed a total of50,000 case(s) or moreServices

Property location reference

ADDRESS · CHEONG WAI BUILDING

Property location reference

  • Location referencePortland Street 62-66
Property details reference

Cheong Wai BuildingAC cleaning service details

Split-type indoor unit cleaning

Clean the cooling coil, fan blades (squirrel cage), dust filter and drain tray, and clear and inspect the drainage. Water collection and electronic board waterproof protection are prepared before cleaning.

Window unit cleaning

Clean the dust filter according to the model, installation location and accessible area, and inspect dust build-up. The customer does not need to dismantle the unit themselves.

Key points of the cleaning process

  1. Inspection and on-site protection
  2. Clean components and drainage
  3. Assembly and test run
  4. Clean up and restore the site
View full cleaning scope and process

Basic scope and separate quotations

Basic indoor cleaning for split-type units does not include the outdoor condenser. If additional cleaning, repairs, or parts replacement are needed, we will first confirm feasibility and provide a quote, and proceed only after the customer’s confirmation.

BEFORE YOU MESSAGE

Prepare these four items before enquiry for a faster quotation

  1. Full service address

    Provide the actual street number, phase, block, floor and unit of Cheung Wai Building; do not rely only on Portland Street 62-66 or nearby landmarks.

  2. Model and number of units

    List the model, unit type and quantity for each unit, and take photos of the unit and model label; if unsure, send photos first

  3. Existing installation position and protection

    Photograph the indoor and outdoor units, drainage and accessible areas, and explain the items under the unit, such as beds, sofas or fixed cabinets; do not dismantle the unit yourself

  4. Symptoms and time of entry

    Explain the odour, dripping, or weak cooling issues, the available access time, and any known registration requirements; if there is tripping or a burning smell, stop using the unit first

ALSO AVAILABLE

You can also enquire about services other than cleaning

QUESTIONS

Cheong Wai BuildingAC service FAQs

What address should be provided for AC service enquiries for Cheong Wai Building?

Cheong Wai Building can be referenced at Portland Street 62-66. Different phases, towers or units may use different entrances, so on-site service still requires the actual street number, tower and unit. Please provide the full address of Cheong Wai Building, including phase, tower, floor and unit, and also provide photos of the AC model, number of units and installation location.

Is there a separate estate or building rate for AC cleaning at Cheong Wai Building?

This is not separately charged by the property name Cheong Wai Building. Rates are checked against the existing model, number of units and main price list; commercial units, outdoor units, high-level work or add-on work must be scoped and quoted separately first.

If Cheong Wai Building AC is leaking or not cooling, should it be cleaned first or inspected first?

First explain where and when the symptom appears. Dust buildup, poor drainage and component faults are handled differently; if the cause is unclear, inspect first before confirming cleaning or repair, and cleaning does not guarantee the fault will be resolved. If water is near electrical equipment, stop using the relevant equipment first.

How is the on-site inspection fee for Cheong Wai Building calculated?

The inspection/call-out fee is HK$500, and it is the same charge, not charged separately twice. If repairs are carried out after the inspection, this HK$500 can be deducted from the repair fee; if no repair is carried out or the quotation is not accepted, HK$500 will be charged.

Does air conditioning repair include a warranty?

Our repair service does not include a warranty, including parts and workmanship. After inspection, we will first explain the fault, the method of handling, the parts needed and the quotation. Work will only begin after confirmation; parts availability is checked according to the actual model.

What installation items need to be confirmed for AC replacement at Cheong Wai Building?

Provide the new and old unit models, indoor and outdoor unit locations, mounting support, piping, drain and power supply positions, and confirm removal of the old unit, transport and any extra works. Running a new power supply from the main switch to beside the unit is not included in basic installation. The general installation warranty is one year and is calculated separately from the manufacturer's warranty for the unit. Building or management requirements are subject to actual confirmation.

Is there a warranty for AC cleaning?

The cleaning service includes a 90-day warranty. The applicable scope and conditions should be checked against the cleaning service terms; for example, in a dripping case, it must first be confirmed whether it was caused by the cleaning. This does not mean all pre-existing faults or leaks are repaired free of charge.

EnquiryCheong Wai BuildingAC services

Enquire about AC cleaning, or learn about inspection, repair and installation arrangements; provideUnit type, quantity and photos to help customer service reply