Air conditioner service range
Cleaning the air conditioner is an important procedure for regular maintenance of the air conditioner. The purpose is to make the air conditioner run smoothly, save energy output, and protect your own health. The process of cleaning the air conditioner is mainly to clean the internal and external parts of the air conditioner, such as fan blades, condensers, radiators, dust screens, etc., to remove accumulated dust, dirt, bacteria and other harmful substances. At the same time, it is also necessary to check whether the various functions of the air conditioner are operating normally, such as replenishing refrigerant, checking the drain pipe, etc., to ensure the performance and safety of the air conditioner.
Air throat split machine cleaning process
-
Check the condition of the air conditioner: Before cleaning, the air conditioner will use inspection tools to check whether the air conditioner is operating normally and evaluate the new and old condition of the equipment to determine whether it needs to be cleaned.
-
Protect the surrounding environment: Before starting cleaning, make sure that the surrounding areas that have the opportunity to come into contact are well protected to avoid contamination or damage.
-
Turn off the power and remove the power cord: turn off the power of the air conditioner and remove the power cord to prevent accidents such as electric leakage
-
Disassemble the dust filter: open the shell and take out the dust filter. The dust filter can be easily removed under normal conditions. Put the dust filter into clean water, and use a special cleaner for air conditioners made in Japan, then rinse it with clean water, and dry the dust filter.
-
Cleaning the pig cage inside the machine: Use a long-handled soft brush to gently brush away the accumulated dust along the direction of the pig cage. If the pig cage is very dirty, use a special cleaner for the air conditioner to gently scrub it, and then rinse it with clean water. Be careful not to damage the cage.
-
Clean the radiator: Use a soft brush to gently brush off the dust on the surface of the radiator. During the cleaning process, be careful not to damage the cooling fins on the radiator. If the bad heat sink is very dirty, you can use a special cleaner for air conditioners to spray on the surface of the heat sink, and then rinse it with clean water.
-
Clean the drain pipe of the indoor unit: Check whether the drain pipe is unblocked. If there is a blockage, a Worx water suction machine will be used to unclog the drain pipe to completely unclog the water.
-
Cleaning of the outdoor unit: Remove the shell of the outdoor unit, and use a water pipe to wash the radiator of the outdoor unit. Generally, high-pressure water guns are not used to avoid damage to the heat sink. After cleaning, reinstall the case.
-
Assembly and inspection: Reinstall the dry dust filter and reinstall the shell. After connecting and turning on the power, check whether the air hose machine is operating normally and whether the cooling has been improved.