top of page
風道

Air-conditioning service range

Cleaning the air conditioner is an important procedure for regular maintenance of the air conditioner. The purpose is to make the air conditioner run smoothly, save energy output, and protect your own health. The process of cleaning the air conditioner is mainly to clean the internal and external parts of the air conditioner, such as fan blades, condensers, radiators, dust screens, etc., to remove accumulated dust, dirt, bacteria and other harmful substances. At the same time, it is also necessary to check whether the various functions of the air conditioner are operating normally, such as replenishing refrigerant, checking the drain pipe, etc., to ensure the performance and safety of the air conditioner.

Window air conditioner cleaning process

  1. Check the condition of the air conditioner: Before cleaning, use testing tools to check whether the air conditioner is operating normally and evaluate the new and old condition of the equipment to determine whether cleaning is required.

  2. Protect the surrounding environment: Before cleaning the air conditioner, make sure to protect the surrounding areas that may be touched to avoid contamination or damage.

  3. Turn off power and remove power cord: Turn off power to the air conditioner and remove the power cord, then remove the dust filter and housing.

  4. Move to the cleaning position: disassemble the window machine and place it in the cleaning position for cleaning, and it is expected to achieve the best effect of dismantling and cleaning for the window machine.

  5. Protect the motor and power switch: Remove the top cover of the air conditioner and seal the motor and power switch to prevent damage.

  6. Cleaning of various parts: use air conditioner cleaner made in Japan, and use Worx high-pressure water gun to clean the cooling fins, fan blades (pig cages), air outlets, heat sinks and chassis.

  7. Drain sewage: completely discharge the sewage generated during the cleaning process to ensure that the inside of the equipment has been cleaned.

  8. Clean the dust filter and casing: wash and drain the dust filter and casing, and reinstall after draining.

  9. Clean the drain pan and throat: Clean the drain pan and throat of the air conditioner to ensure it is unobstructed.

  10. Reassembly: Reinstall all cleaned components and put the air conditioner back in place.

  11. Test run: Turn on the air conditioner and test it to ensure that there is no problem with the cooling of the air conditioner and that the released air is fresh. After the test is completed, the site is cleaned up for the client and the cleaning procedure is completed.

Split type air conditioner cleaning process

  1. Check the condition of the air conditioner: Before cleaning, use testing tools to check whether the air conditioner is operating normally and evaluate the new and old condition of the equipment to determine whether cleaning is required.

  2. Protect the surrounding environment: Before starting cleaning, make sure that the surrounding areas that have the opportunity to come into contact are well protected to avoid contamination or damage.

  3. Turn off the power and remove the power cord: turn off the power of the air conditioner and remove the power cord to prevent accidents such as electric leakage

  4. Removal of parts: use tools such as electric batch to remove fan blades, dust filter and casing.

  5. Protect the electronic board: Use waterproof tape as the first layer of protection, then cover the electronic board, and finally cover the air conditioner with a water cover to prevent the electronic board from being splashed by water.

  6. Cleaning the cooling fins, fan blades and drain pan: Clean the cooling fins, fan blades (pig cages) and drain pan with a special cleaner made in Japan for air conditioners.

  7. Clean the drain pipe: Use a Worx high-pressure water gun to clean the drain pipe to ensure it is unobstructed.

  8. Clean the fan blades, casing and dust filter: Use clean water and a special cleaner for air conditioners to clean the fan blades, casing and dust filter to remove dirt and bacteria.

  9. Reinstall components: reinstall all cleaned components and turn on the power.

  10. Test operation: Turn on the air conditioner to run and test to ensure that the cooling effect of the air conditioner is no problem, and the discharged air is fresh and natural.

  11. Clean up the site and complete the cleaning: After completing the test, clean up the site for the client.

3.png

Four-sided fan cleaning process

  1. Air conditioner inspection: Before cleaning, use inspection tools to check whether the air conditioner is operating normally and evaluate the condition of the four-sided outlet fans to determine whether cleaning is required.

  2. Protect before cleaning: Before you start cleaning, make sure you protect any areas you may come into contact with to prevent contamination or damage.

  3. turn off the power andRemove the power cord: Turn off the power of the air conditionerRemove the power cord.

  4. Remove ceiling machine accessories: Remove the dust filter and casing.

  5. Remove the electronic accessories of the ceiling machine: use tools such as an electric screwdriver to remove electronic components such as electronic boards.

  6. Remove the ceiling machine assembly accessories: use tools such as an electric screwdriver to remove the water tray, face plate and fan blades.

  7. Put on the water cover: Put the water cover on the machine to prevent it from beingwater splashed.

  8. Start cleaning: Use a special cleaner for air conditioners made in Japan to clean the refrigeration chips and water pumps.

  9. Cleaning accessories: Air conditioners made in JapandedicatedThe cleaner rinses the drip pan, fan blades, housing and filter to remove dirt and bacteria.

  10. Cleaning is completed and tested: reinstall all the cleaned parts, turn on the air conditioner, and ensure that there is no problem with the cooling of the four-sided fan and the released airfresh and natural.

  11. Complete Cleaning: After completing the test, restore the site for the client and ensure the work area is clean.

_edited.jpg

Central air conditioner cleaning process

  1. Check the condition of the air conditioner: Before cleaning, use testing tools to check whether the air conditioner is operating normally and evaluate the new and old condition of the equipment to determine whether cleaning is required.

  2. Protect the surrounding environment: Before cleaning, ensure that the areas that will have the opportunity to come into contact are protected from contamination or damage.

  3. turn off the power andRemove the power cord: Turn off the power of the air conditionerRemove the power cord, and then remove the dust filter and case.

  4. Loosen cords: Loosen central air conditioner cords for easy cleaning.

  5. Move to the cleaning position: Remove the air conditioner and place it in the cleaning position for cleaning, so as to achieve the best cleaning effect.

  6. Clean the cooling fins, fan blades and chassis: seal the motor with a tool, and use a special cleaner for air conditioners made in Japan with a Worx high-pressure water gun to clean the cooling fins, fan blades (pig cages) and chassis.

  7. Clean the drainpipe: Use a Worx water suction machine to suction and drain the drainpipe to prevent the throat from clogging.

  8. Test operation: reinstall all the cleaned parts, turn on the air conditioner to ensure that there is no problem with the cooling of the central air conditioner, and the released airfresh and natural.

  9. Clean up the site: After testing is complete, restore the site for the client and ensure the area of work is cleaned.

9.png

Ceiling bathroom treasure cleaning process

  1. Check suitability: Make sure the Bathtub is suitable for washing.

  2. Protect the site: Protect the bathroom site with a waterproof protective material.

  3. Turn off the power and disassemble parts: cut off the power of the bathroom treasure, and then disassemble the relevant parts.

  4. Remove dust: Use a tool to remove dust from heating wires and dust filters.

  5. Clean the casing and pig cage: Use special detergent and high-pressure water gun to clean the casing and pig cage of the bathroom treasure.

  6. Blow dry and wipe parts dry: Blow dry and wipe down individual parts.

  7. Disinfection and antibacterial coating: Spray on SafePRO® 180-day long-lasting disinfection and antibacterial coating, which can effectively kill 99.99% of viruses, including Covid-19 novel coronavirus.

  8. Assembly and testing: Reassemble the mechanism and test the bathroom treasure.

  9. Clean up the site: Clean up and tidy up the bathroom site environment.

10.png

Window type bathroom treasure cleaning process

  1. Confirm whether it needs to be cleaned: check whether the bathroom treasure is suitable for cleaning and maintenance.

  2. Protect Work Areas: Cover bathroom areas with appropriate waterproof material to prevent damage.

  3. Power supply and disassembly: first turn off the power supply of the bathroom treasure, and then disassemble each part step by step.

  4. Removal of dust accumulation: use tools to remove dust accumulation on heating wires and dust screens.

  5. Washing the casing and internal components: Use professional cleaners and high-pressure water guns to thoroughly clean the casing and internal components such as pig cages.

  6. Parts Air Drying and Wiping: Allow the disassembled parts to air dry and wipe dry with a cloth.

  7. Apply disinfection and antibacterial solution: Use SafePRO® 180-day long-lasting disinfection and antibacterial coating, which can effectively kill 99.99% of viruses, including Covid-19 novel coronavirus.

  8. Reassembly and inspection: Reassemble the components of the Bathroom Treasure, and check its function to ensure normal operation.

  9. Cleaning and Restoration of Work Area: Final cleaning of the bathroom work area and restoration of it to its original state.

bottom of page